vacuumbrand PC 8 / MD 12C, Instructions For Use Manual

Page: 40 / 52

page 40 of 52
For
MD 12C / MV 10C
only:
Separator (at inlet) .................................... 20699980
(small flange DN 25)
Centring ring (PBT) DN 20/25 ...................
20660196
with FPM seal
Clamping ring DN 20/25 (aluminum) ......... 20660001
+
The separator at the inlet prevents droplets and particles from enter-
ing the pump. Lifetimes of diaphragms and valves are enhanced. Im -
proves vacuum in case of condensation.
+
Connects directly to the inlet of the diaphragm pump by means of
clamping ring and centring ring.
DCP 3000 vacuum gauge .......................... 20683190
with VSP 3000 (Pirani) gauge head
1*10
3
mbar - 1*10
-3
mbar, 100-230V 50-60 Hz
CVC 3000 vacuum controller ...................... 683160
1080 mbar - 0.1 mbar, 100-230 V 50-60 Hz
DCP 3000 vacuum gauge .......................... 20683170
with VSK 3000 gauge head
1080 mbar - 0.1 mbar, 100-230V 50-60 Hz
VSK 3000 gauge head .............................................................................. 20636657
capacitive, ceramic diaphragm sensor 1080-0.1 mbar
VSP 3000 Pirani gauge head, 1*10
3
- 1*10
-3
mbar .................................... 20636163
Accessories