vacuumbrand PC 510 select, Instructions For Use Manual, Page: 10 / 88

11 20901101_EN_PC5xx-6xx_VARIO_select_Serie_V1.0_280618
Introduction
PTFE Polytetrafluorethylene
PVDF Polyvinylidene fluoride
RMA‑N° Return Merchandise Authorization number
SW Wrench size (tool)
resp. responsible (supervising)
e. g., for example
* Labeling on vacuum pump or component

see also Product-specific abbreviations on page 29
1.2.6 Term definitions
Separator flask Glass flask / separator mounted at the inlet or
outlet.
Vapor condenser*
Cooling condenser with receiving flask mount -
ed at the outlet (pressure side).
Flow control valve Valve at the inlet of PC 511/611 select for man-
ual vacuum control
PC 5xx select
PC 6xx select
Vacuum pumping unit with valves for man-
ual and/or electronic vacuum control in-
cluding VACUU·SELECT
®
controller and
VACUU·SELECT
®
Sensor .
VACUU·BUS
®
Bus system from VACUUBRAND for com-
munication between peripheral devices with
VACUU·BUS
®
enabled gauges and controllers.
The maximum admissible cable length is 30 m.
VACUU·BUS
®
address
Address which enables the VACUU·BUS
®
client
to be unambiguously assigned within the bus
system, e.g., for connecting multiple sensors
with the same measurement range.
VACUU·BUS
®
client
Peripheral device or component with
VACUU·BUS
®
port which is integrated in the
bus system, e. g., sensors, valves, level indica -
tors, etc.
VACUU·BUS
®
connector
4‑pin round connector for the bus system from
VACUUBRAND .
VACUU·BUS
®
configuration
Using a measuring device or controller,
e. g, VACUU·SELECT
®
, assign another
VACUU·BUS
®
address to a
VACUU·BUS
®
com-
ponent.
VACUU·SELECT
®
Vacuum controller, controller with touchscreen;
consisting of operating panel and vacuum sen-
sor.
Abbreviations
Product‑specific
terms