26
20901059_EN_VACUU·SELECT_V1.3_280119
Product description
3.3 VACUU·BUS® peripheral devices
External valves, level sensors and vacuum sensors (up to the fine
vacuum range) are components which can be connected via the
VACUU·BUS
®
directly to the controller.
VACUU·BUS
®
components can be easily added or removed at
any time via component detection. Component activation permits
the activation or deactivation of connected components.
VACUU·BUS components
1
(clients)
When the controller is switched on, it checks the current con
‑
figuration.
VACUU·BUS
®
components are automatically detected
and are used and monitored until the controller is switched off. If a
previously connected component is no longer found, the control
‑
ler displays an error message.
In the case of the
VACUU-SELECT
®
, all
VACUU-BUS
®
components can be individually activated or deactivated
without disconnecting the plug. The venting valve of a
VACUU-SELECT
®
Sensor
can also be easily deactivated at
the controller.
See also chapter:
7.1.10 Administration – VACUU·BUS
1
See also table in chapter: 9.2 Ordering information on page 83
Example
VACUU·BUS
principle
with different
components
