vacuubrand VACUU-PURE 10C, Instructions For Use Manual

Page: 34 / 96

34 20901224_EN_VACUU·PURE 10C_V1.8_221122
Installation and connection
Set up the vacuum pump
5 cm
12 cm 5 cm
>
Place the vacuum pump on a stable, non‑vibrating, level
surface.
>
When installing in lab furniture, maintain a minimum
distance of 5 cm (2 in) to adjacent objects or surfaces.
>
The product must be positioned so that the on/off switch
and the power plug can be reached and are accessible,
minimum distance 12 cm (5 in).
>
Prevent heat accumulation and ensure sufficient air
circulation, especially in closed housings.
>
Always ensure that there is an adequate air supply and air
extraction to remove the warm exhaust air from the vacuum
pump. Provide an external forced ventilation with a volume
flow of approx. 100 m
3
/h when installing in lab furniture.
Observe limitation of use
Limitation of use
(US)
Operating ambient temperature 10 – 40 °C 50 – 104 °F
Max. altitude 2000 m
above sea level
6562 ft
above sea level
Minimum distance to
adjacent parts
5 cm (12 cm) 2 in (5 in)
Relative humidity 30 – 85 %, non‑condensing
Pollution degree 2
Protection class IP 20 NEMA type 1
Prevent condensation or external contamination from dust, liquids, and
corrosive gases.
IMPORTANT!

Example
Sketch of
minimum distances
in lab furniture
Observe limitation
of use