manualshive.com logo in svg

vacuubrand PC 510 select, Instructions For Use Manual

Share
Download
vacuubrand PC 510 select Instructions For Use Manual Download Page 33

33

20901101_EN_PC5xx-6xx_select_Serie_V1.3_260819

Installation and connection

Check installation 

conditions 

 

>

Lift the unit out of the pack

-

aging by the recessed grips.

 

>

Never use vapor condenser, its holder or glass flask as car

-

rier for placing the pumping unit. They are not designed as 

carrying aid.

 

>

Use only the recessed grips and / or the handle to carry the 

pumping unit to the place of installation.

4.2  Installation

NOTICE

Condensate can damage the electronics.

A large temperature difference between the storage location 

and the installation location can cause condensation.

>

>

After goods receipt or storage, allow your vacuum device to 

acclimatize for at least 3‑4 hours before initial use.

Check installation conditions

 

ƒ

The device is acclimatized.

 

ƒ

Ambient conditions have been observed and are within the limi-

tation of use.

 

ƒ

The pump must have a stable and secure base without addi-

tional mechanical contact apart from the pump feet.

IMPORTANT!

Summary of Contents for PC 510 select





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands