vacuubrand MZ 1C, Instructions For Use Manual

Page: 56 / 92

page 56 of 92
Accessories
Vacuum hose (caoutchouc) I.D. 3/8” (10 mm ID) ..................................... 20686002
Silencer for hose nozzle 3/8” (DN 10 mm) ...............................................
20636588
Attention : Dust-laden gases, deposits and condensed solvent vapor can restrict air
flow out the silencer. The resultant back pressure can lead to damage of pump bear -
ings, diaphragms, and valves. Under those conditions, a silencer must not be used.
In-line valve VV-B 6C, VACUU•BUS, for CVC 3000 .................................. 20674291
Level sensor for catchpots 0.52 qt (500 ml), VACUU•BUS, ......................
20699908
for CVC 3000
Solenoid operated valve (C3-B), VACUU•BUS ........................................ 20636668
for CVC 3000, for assembly at distribution head
Upgrade kit SYNCHRO ........................................................................... 20699920
to two inlets (valve block; replaces distribution head)
Modification kit for small flange KF DN 16
.......................................................... 20
699939
at inlet of distribution head
Hose nozzle for tubing I.D. 1/4” / 3/8” (DN 6/10 mm), ............................... 20636635
for inlet at distribution head
Elbow piece (90°) for PTFE tubing* ...........................................................
20637873
for assembly at inlet of distribution head
Blind flange (C1) for assembly at distribution head ................................... 20677136
Flow control diaphragm valve (C2) ........................................................... 20677137
for assembly at distribution head
Manometer module (C5) ..........................................................................
20677100
for assembly at distribution head
CVC 3000 Vacuum controller ..................... 20683160
100-230 V 50-60 Hz
Upgrade possibilities for MD 1C + AK + EK:
Vacuum gauge DVR 2pro ......................... 20682906