page 2 of 68
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. manual-no.: 999290 / 12/12/2016
Dear customer,
Your VACUUBRAND diaphragm pump shall support you at your work for a long time without any trouble
and with full load output. Thanks to our large practical experience we attained much information how you
could add to an efficient application and to personal safety. Please read these instructions for use prior
to the initial start-up of your pump.
VACUUBRAND diaphragm pumps are the result of many years of experience in construction and practi-
cal operation of these pumps combined with the latest results in material and manufacturing technol-
ogy.
Our quality maxim is the ”zero fault principle”:
Every delivered diaphragm pump is tested extensively including an endurance run of 14 hours. Due to
this endurance run, also faults, which occur rarely, are reported an can be corrected. Every single dia-
phragm pump is tested on achievement of the specification after the endurance run.
Every VACUUBRAND pump leaving our factory achieves the specification. We feel obliged to
this high quality standard.
We are aware that the vacuum pump should not draw a part of the real work and we hope to contribute
with our products to an effective and trouble-free realisation of your work.
Yours
VACUUBRAND GMBH + CO KG
After sales service: Contact your local dealer or call +49 9342 808-5500.
Trademark index:
VACUU•LAN
®
(US-Reg.No 3,704,401), VACUU•BUS
®
, VACUU•CONTROL
®
, Peltronic
®
, VARIO
®
(US-
Reg.No 3,833,788), VARIO
®
-SP, VACUUBRAND
®
(US-Reg.No 3,733,388) and also the shown com-
pany logos are trademarks of VACUUBRAND GMBH + CO KG in Germany and/or other countries.
Attention: The manual of the offered device with ATEX approval
is available in German, English and French (DVR 3: also Dutch).
The user is only permitted to operate the device if he under-
stands one of these languages or a technically correct transla-
tion of the complete manual. The manual must be completely
read and understood before operation of the device. All speci
-
fied measures must be applied, or else must be replaced by
equivalent measures at the user’s own risk.
The device has an ATEX approval according to EC-directives
and standards. Users outside of the European Community
must check national regulations for hazardous areas.
