background image

page 16 of 17

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully 
the validity of this document with respect to his product. manual-no.: 

999001 / 04/04/2012

Hersteller / Manufacturer / Fabricant: 

VACUUBRAND GMBH + CO KG · Alfred-Zippe-Str. 4 · 97877 Wertheim · Germany

Hiermit erklärt der Hersteller, dass das Gerät konform ist mit den Bestimmungen der Richtlinie 2004/108/

EG.

Hereby the manufacturer declares that the device is in conformity with the directive 2004/108/EC.

Par la présente, le fabricant déclare, que le dispositif est conforme à la directive 2004/108/CE.

Vakuummessgerät / Vacuum gauge / Vacuomètre

Typ / Type / Type: DVR 2

Artikelnummer / Order number / Numéro d‘article: 682902

Seriennummer / Serial number / Numéro de série: Siehe Typenschild / See rating plate / Voir plaque 

signalétique

Angewandte harmonisierte Normen / Harmonized standards applied / Normes harmonisées utilisées:

DIN EN 61326-1

Bevollmächtigter für die Zusammenstellung der technischen Unterlagen / Person authorised to compile 

the technical file / Personne autorisée à constituer le dossier technique:

Dr. J. Dirscherl · VACUUBRAND GMBH + CO KG · Alfred-Zippe-Str. 4 · 97877 Wertheim · Germany

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

(Dr. F. Gitmans)

Geschäftsführer / Managing director / Gérant 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Ort, Datum / place, date / lieu, date

Wertheim, 04.04.2012

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

(Dr. J. Dirscherl)

Technischer Leiter / Technical Director / Directeur technique 

ppa.

EG-Konformitätserklärung

EC Declaration of Conformity

Déclaration CE de conformité

VACUUBRAND GMBH + CO KG

Alfred-Zippe-Str. 4 · 97877 Wertheim

T +49  9342 808-0 · F +49 9342 808-5555

[email protected]

www.vacuubrand.com

Summary of Contents for DVR 2


















Reviews: