16 • vacon
description of parameters
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
Speed Curve 1 parameters (M2 -> G2.2.4)
Speed curve 1 is used as the default values for acceleration and deceleration and jerks.
2.2.4.1
Acceleration time 1
2.2.4.2
Deceleration time 1
Acceleration and deceleration of the lift car are presented in [m/s2]. Acceleration and
deceleration curves are affected by the jerk time settings, too.
2.2.4.3
Acc inc jerk 1
Acceleration increase jerk1.
Jerk times are presented in [ms].
Speed [m/s]
acceleration
[m/s
2
]
t [s]
t [s]
P2.2.4.3
P2.2.4.4
P2.2.4.1
Figure 1. Jerks related to speed and acceleration
2.2.4.4
Acc dec jerk 1
Acceleration decrease jerk 1.
2.2.4.5
Dec inc jerk 1
Deceleration increase jerk 1.
2.2.4.6
Dec dec jerk 1
Deceleration decrease jerk 1.
