Vacon 500X, User Manual

Page: 63 / 124

24-hour s358 (0)40 837 1150 • Email: vacon@vacon.com
vacon 500x parameters vacon
z
62
7
003 Rated Current Read-Only
Range: 0.0-200.0 A
Level: 2
Parameter 003, the Rated Current parameter, displays the normal duty current rating of the model of drive.
005 Serial No 1 Read-Only
Range: 0-65535
Level: 2
Parameter 005, Serial No 1, contains a number that corresponds to the year and week in which the drive
was manufactured. The data in this parameter and parameter 006 are combined to make the drive serial
number.
006 Serial No 2 Read-Only
Range: 0-65535
Level: 2
Parameter 006, Serial No 2 , contains a number that determines the number of the drive that was
manufactured during the week of Serial No 1. The data in this parameter and parameter 005 are combined
to make the drive serial number.
007 USB Soft. Rev Read-Only
Range: n/a
Level: 2
Parameter 007, USB Soft. Rev , shows the revision of the USB software resident in the drive.
For more information on using the USB interface, and saving drive parameters and Keeper data to a USB
flash memory device, see
“Storing Data and Reflashing Using a Flash Memory Device” on page 47 .
008 Option Installed Read-Only
Range: n/a
Level: 2
This parameter identifies the option installed in the drive. Options are:
Value Description
0 No options installed
1 115 Vac and Encoder Feedback Option Card
2 DeviceNet Option Card
3 Ehternet IP Option Card
7 ModBus TCP/IP Option Card
009 Fbus Soft. Rev Read-Only
Range: n/a
Level: 2
This parameter shows the revision level of the Fieldbus software in the option board attached to the drive.
030 Pwr Down Date Read-Only
Range: n/a
Level: 2
This parameter shows the date of last power-down or reset of the drive, in dd/mm/yy format.
031 Pwr Down Time Read-Only
Range: n/a
Level: 2
The day and time of the last power-down or reset of the drive, in Dd/mm/yy format (example: Tu/09/01).
102 Output Freq Read-Only
Range: 0.0 to 400.0 Hz
Levels 1,2
Parameter 102 , the Output Frequency parameter, shows the frequency being applied to the motor
connected to the drive (ramp).
103 Output Voltage Read-Only
Range: 0 to 600 V
Levels 1,2
Parameter 103 , the Output Voltage parameter, displays the output voltage of the drive.
104 Output Current Read-Only
Range: 0.0 to 200.0 A
Levels 1,2
Parameter 104 , the Output Current parameter, displays the output current of the drive.