1 Safety precautions
5
1.4
Appliance installation
▪
The appliance must be installed by
qualified personnel only.
▪
Each step must be carried out and
checked in full in the order specified.
▪
Electrical connections must be carried
out by qualified personnel in accord-
ance with the guidelines and standards
for low-voltage installations and the spe-
cifications of the local electricity supply
companies.
▪
A plug-in appliance may only be con-
nected to a socket outlet with earthing
contact, installed according to specifica-
tions. An all-pole mains isolating device
with 3 mm contact opening should be
provided in the house wiring system.
Switches, plug and socket devices, cir-
cuit breakers and fusible cut-outs which
are accessible after installation and
which have all-poles switching are per-
missible as isolating devices. Effective
earthing and separately installed neutral
and earth conductors ensure safe and
fault-free operation. After installation,
live parts and cables with basic insula-
tion must not be accessible. Check old
installations.
▪
Refer to the identification plate for in-
formation on the required mains
voltage, current type and fuse protec-
tion.
▪
All plastering, plasterboarding, wall pa-
pering and painting work is to be car-
ried out prior to installing the appliance.
▪
Efficient repairs can only be guaranteed
if it is possible to de-install the complete
appliance at any time without causing
any damage.
1.5
Instructions for use
Before using for the first time
▪
The appliance must be installed and
connected to the electricity supply in
accordance with the separate installa-
tion instructions. Have a qualified fitter/
electrician carry out the necessary
work.
▪
Electrical safety (protection against con-
tact) must be ensured by the installa-
tion.
▪
If the appliance is visibly damaged, do
not use it. Contact our Customer Ser-
vices. Do not use the appliance if the
cold circuit is damaged.
▪
WARNING: The required room volume
for the appliance is at least 1 m
3
per
8 g refrigerant (isobutane R600a). In
rooms that are too small, a leak can
produce a flammable air-gas mixture.
The filled volume of the refrigerant is
shown on the identification plate.
▪
WARNING: When installing the appli-
ance, ensure the mains cable is not
trapped or damaged.
▪
WARNING: Do not locate multiple port-
able socket-outlets or portable power
supplies at the rear of the appliance.
▪
Avoid using extension cables.
▪
When installed, it is important to ensure
that the air inlets and vent openings are
not covered or blocked.
▪
Retain these operating instructions for
future reference.
▪
Operating instructions for the appliance
can be downloaded from
www.vzug.com.
▪
Dispose of the packaging material in
accordance with local regulations.
Correct use
▪
This appliance is intended to be used
exclusively for the storage of wine. The
appliance must only be used as de-
scribed in the operating instructions.
