6 Drying
▸ Press the
button.
Factory settings
YES:
NO:
Restoring factory settings:
«YES»:
▸ Press the
button.
Factory settings
restored!
«NO»:
▸ Press the
button.
6
Drying
6.1
Preparing the appliance
After the appliance is transported or re-sited, it must be left to stand in the normal
operating position for around 2 hours. Failure to do this can result in damage to
the appliance.
▸ Plug the appliance in at the mains or turn the wall switch on.
1
0
1
0
6.2
Loading the appliance
▸ Open the appliance door (press at the edge of door in
the area marked by dots) or press the
button.
▸ Loosely load wet washing items one by one into the ap-
pliance.
–
See 'Programme overview' for maximum load capa-
city.
–
Ideally, fill the drum ⅔ full.
–
Large blankets, in particular, need plenty of room to
tumble.
▸ Close the appliance door (pushing firmly to).
When closing the appliance door, check that no items of washing are trapped.
–
In the display appears:
Select programme
The indicator lights for the programme buttons flash.
If no programme selection is made within 15 seconds, all the displays go out. However,
it is still possible to make a programme selection.
18
