5.9
Additional functions
Delayed start
The programme start can be delayed from one hour to a maximum of
24 hours. During shut-off periods, which are determined by the local
electricity supplier, the delayed start time is extended by the length of
time the electricity was shut off. This is not shown in the display.
Temperature setting
The washing temperature can be lowered in 10°C steps (or above
80°C in 15°C steps), allowing lightly soiled (not stained) textiles to be
washed with a saving in energy.
•
The temperature of the
programme can be increased to 40°C.
•
The temperature of the
programme can be increased to 30°C.
Cold wash
For the
,
,
and
programmes, if a temperature below 20°C is
selected, then
Cold wash
is shown.
Refresh programme
For the
programme with
, if a temperature below 20°C is selected,
then
0h18
Refresh programme
is shown. This is suitable e.g. for washing new
textiles for the first time.
Spin speed
The spin speed can be changed in steps of 200 rpm (1200, 1000, 800,
600, 400 rpm and stop after rinsing).
Delicates can thus be spun at a low spin speed. However, this
increases the drying time (greater energy consumption for tumble
drying).
With «Stop after rinsing», the washing remains lying in the water after
the final rinse. There is no spinning nor intermediate spinning.
5 Programme overview
24