… Trouble-shooting
43
… after finishing cooking, even after some time still no water is
being pumped off
After a power failure
After a power failure,
flashes in the display.
Setting the time
A
Press the
and
buttons at the same time.
A
Turn the
adjusting knob to set the time.
A
Press the
adjusting knob to confirm.
䡲
The user settings remain unchanged.
Possible cause
Solution
䡲
For safety reasons, the
water in the boiler is not
pumped off until the temper-
ature of the water drops to
below 80 °C.
A
If there is enough cold water in the water tank,
it will be automatically pumped into the boiler to
cool down the water in the boiler.
A
If there is not enough cold water in the water
tank, allow the boiler to cool down on its own
(this can take up to 30 minutes). The appliance
may be used without further ado.
䡲
In the event of a power failure during descaling:
A
Turn or press the
adjusting knob.
– Descaling continues automatically. The phase that was interrupted will
be repeated.
