… Care and maintenance
37
Descaling
A
Depress
and
at the same time.
–
flashes in the display.
– Then
flashes in the display.
A
Remove and empty the water tank. Pour the entire contents of the special descaler
undiluted into the water tank.
A
Put the water tank back.
A
Press the
adjusting knob to confirm.
–
appears in the display.
– The appliance now enters the descaling phase which lasts 30 minutes.
– Then
flashes in the display.
A
Remove the water tank, pour away the descaler and fill the tank with 1.2 l cold
water.
A
Put the water tank back.
–
appears in the display.
– The appliance now enters the rinsing phase.
A
As soon as
flashes in the display, remove the water tank, pour away the
water and fill the tank again with 1.2 l cold water.
A
Put the water tank back.
–
or
appears in the display.
Depending on how dirty the water that is being pumped off is, additional rinsing will
be carried out.
–
or
appears in the display.
A
When
appears in the display, remove, empty and dry the water tank.
– The
message goes out and the time is visible in the display again.
For safety reasons, once started the descaling process cannot
be interrupted.
The appliance can be descaled with the appliance door open or closed. The
appliance must be switched off.
