5 Programme overview
Drying
The washing is dried by the heat pump. The drying programme is monitored
by a moisture and temperature sensor. As soon as the required level of dry-
ness is reached, the «Cool down / Airing» phase starts.
Cool down / Airing
The heat pump is switched off and the washing continues to be aired until it
has cooled down to a temperature.
This phase lasts 30 minutes. The washing can then be unloaded.
Select the
easy care programme for delicate textiles.
The following diagram gives an overview of the programme settings in the ex-
tra programme hygiene.
Easy care
Delayed start
* Factory setting
Yes
No *
Easy care
•
Very gentle programme with reduced temperature.
•
Particularly suitable for fine textiles, canvas shoes, trainers and functional
clothing (e.g. Gore-Tex).
Delayed start
•
Take advantage of cheap-rate electricity (setting range of 1 minute –
24 hours).
•
During shut-off periods – determined by the local electricity supplier – the
delayed start time is extended by the length of time the electricity is shut off.
This is not shown in the display.
28
Summary of Contents for REFRESH-BUTLER
Page 1: ...Operating instructions REFRESH BUTLER Textile care system...
Page 39: ...7 Operating the appliance 7 3 Loading examples 39...
Page 65: ...65 13 Notes...
Page 66: ...66...