Installation instruction
Microwave
Construction type 60-381
400010800366
22/09/2015
J24006113-R02
1
The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.
Validity
These installation instructions apply to the models:
24006, 24008
General notes
If installing into a combustible material, the guidelines and standards for low voltage installations and fire
protection must be strictly observed.
Identification plate
▸
Open appliance door.
–
The identification plate is located on the left above the cooking
space (see illustration).
1
Electrical connections
Electrical connections must be carried out by qualified personnel in accordance with the guidelines and
standards for low-voltage installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to spe-
cifications. An all-pole mains isolating device with 3 mm contact opening should be provided in the house wir-
ing system. Switches, plug and socket devices, circuit breakers and fusible cut-outs which are accessible after
installation and which have all-poles switching are permissible as isolating devices. Effective earthing and sep-
arately installed neutral and earth conductors ensure safe and fault-free operation. After installation, live parts
and cables with basic insulation must not be accessible. Check old installations.
▸
The appliance is designed for use up to a max. altitude of 2000 m above sea level.
▸
Refer to the identification plate for information on the required mains voltage, current type and fuse protection.
The mains plug must not be cut off.
