3 Operating the appliance
3
Operating the appliance
3.1
Operation
Extending and switching on the appliance
▸ Hold the
button depressed for 3 seconds.
–
The hood body is extended and the appliance switches on at power level .
▸ Touching the / / or
button switches the appliance on at power level 1, 2, 3 or
intensive.
–
The corresponding button illuminates to indicate which power level is being used.
We recommend switching the appliance on at power level 2 some five minutes be-
fore starting to cook. Use a low power level for normal cooking smells and a
higher power level for very strong cooking fumes and smells.
Switching off the appliance and retracting the hood
▸ Touching the
button switches the appliance off.
▸ Hold the
button depressed for 3 seconds.
–
The hood body is retracted.
After you have finished cooking, allow the appliance to run for another 15 minutes
(see page 10) so that the cooking fumes and smells can be extracted.
Do not put your hands into the hood when the hood body is moving.
3.2
Illumination
▸ Touch the
button.
–
The illumination switches on at maximum intensity.
▸ Touch the
button again.
–
The illumination switches off.
3.3
Changing the light intensity
▸ When the illumination is switched on, hold the
button depressed for two seconds.
–
The light intensity lowers.
▸ When the light intensity is low, press the
button.
–
The light intensity increases.
▪
The illumination switches off if, prior to this, the
button has been held depressed
for two seconds when the light intensity is low or if it is pressed when the light intens-
ity is normal.
3.4
Intensive level
▸ Touch the
button.
–
The
button flashes.
–
The intensive level switches on.
▪
If another power level had been running beforehand, then the appliance will automat-
ically revert to this power level after six minutes has elapsed.
9
Summary of Contents for DSTS9
Page 1: ...Operating instructions DSTS9 Range hood...
Page 22: ...22 10 Notes...
