3 Operating the appliance
–
The intensive level switches off before time.
3.5
After-running time
With the after-running time function, the appliance runs for another 15 minutes and then
switches off.
▸ Press the / or button and select the desired power level.
▸ Press the
button.
–
The after-running time switches on.
–
The
button flashes for 15 minutes.
▸ Press the
button again.
–
The
button no longer flashes.
–
The after-running time switches off before time.
3.6
Wipe protection
Activating wipe protection
▸ Hold the
button depressed for five seconds.
–
Wipe protection is activated, all the buttons flash on once and then flash from left to
right.
Wipe protection is useful when cleaning the hood.
Deactivating wipe protection
▸ Hold the
button depressed for five seconds.
–
Wipe protection is deactivated.
3.7
CleanAir
Switching the CleanAir function on/off
▸ Press the
button.
–
The
button illuminates.
–
The
button flashes.
–
The range hood switches on every hour for 10 minutes.
▸ Press the
or
button.
–
The buttons no longer illuminate.
–
The CleanAir function switches off.
3.8
Saturation indicators
Saturation indicator for metal grease filters
The
button flashes after 100 operating hours. The saturation level has been reached
and the grease filters must be cleaned.
Saturation indicator for activated charcoal filters
The
button flashes (after 700 operating hours) when the activated charcoal filters are
saturated and must be replaced.
10
Summary of Contents for DIAS 10
Page 1: ...Operating instructions DIAS 10 Range hood...
Page 21: ...21 10 Notes...
Page 22: ...22...
