4 Care and maintenance
Cleaning
▸ Clean the grease filters
3
in the dishwasher.
▸ Select an «intensive» or «heavy» wash programme with a warm prewash.
Cleaning may cause the metal grease filters to become slightly discoloured. How-
ever, this will not affect the functioning of the filters in any way.
If no dishwasher is available:
▸ Clean the grease filters
3
in the sink with hot water and detergent.
▸ Then soak the grease filters
3
in hot water in the sink for about 2 hours and finally
clean with a washing-up brush. Rinse well with clean, cold water.
Installing
▸ Reassemble in the reverse order.
1
2
3
Ensure all centring pins
1
are positioned properly in the receiving slots
2
.
Resetting the saturation indicator
▸ With the appliance switched on, hold the
button depressed for 2 seconds to reset
the saturation indicator.
▸ All the displays illuminate briefly if reset correctly.
If all the displays are still flashing after the reset, the reason for this is: the metal
grease or activated charcoal filters are also dirty and must be cleaned or replaced.
4.3
Long-life activated charcoal filter
The long-life activated charcoal filter must be cleaned and reactivated bimonthly with nor-
mal use or whenever the saturation indicator flashes. If properly cared for, the service life
of the long-life activated charcoal filter is 3 years.
Disconnect the appliance from the mains and unscrew the fuse for the appliance
or switch off the circuit breaker.
12
