11
3
Operation
3.1
Switching the appliance on
To switch the illumination and the
extractor fan on, the deflector plate
must be pulled out.
➤
Pull the deflector plate out.
3.2
Switching the extractor fan on/off
➤
Slide the
switch to
1
,
2
,
3
or
4
.
Run only briefly (a few minutes) at
power level
4
, then switch to a lower
power level.
➤
To switch off, set the switch to
.
The appliance is most effective when the deflector plate is fully pulled
out.
We recommend switching the appliance on at power level
1
some
5 minutes before starting to cook. After finishing cooking, allow the
appliance to run for another 15 minutes so that the cooking fumes
and smells can be extracted.