manualshive.com logo in svg

V-ZUG CSTXSL60, Operating Instructions Manual, Page: 60 / 88

Share
Download
V-ZUG CSTXSL60 Operating Instructions Manual Download Page 60

11 User settings

11.9 

Volume

The acoustic signal can be set at one of two levels of loudness or can be
completely switched off. 

An acoustic signal is emitted in the event of a malfunction even if the
setting is set to «off».
A short acoustic signal is emitted when the appliance is switched off
even if the setting is set to «off» (safety function).

11.10 

Assistance functions

Illumination

The «Automatic» setting switches on the cooking space illumination 3 minutes
before the end time of a cooking process; e.g. in the case of an automatic
programme or an operating mode with a set duration. Additionally, the illumin-
ation switches on automatically when the appliance door is opened.

Press the 

 sensor button to switch the illumination on or off at any

time.
If the illumination is not switched off, it will go out after a maximum of
5 minutes to save electricity.

Automatic door handle function

Only relevant to appliances without handles.
When the automatic door handle function is switched on (factory setting), the
door handle is extended automatically, e.g. when an operating mode is set or
comes to an end. It is then retracted again.

When the automatic door handle function is switched off, the door handle re-
mains extended at all times.

Water tank

With the «Automatic» setting, the water tank is automatically ejected when it is
empty.

60

Summary of Contents for CSTXSL60

























































































Reviews:

No comments