V-ZUG CSTXSL60 Operating Instructions Manual Download Page 39

Page: 39 / 88

7 GourmetGuide

►

Press the adjusting knob to confirm.

–

The step is ended.

–

If it was the final step, the recipe ends too.

–

If it was not the final step, the next step starts.

Changing recipes

Any recipe – from a recipe book as well as your own recipes – can be copied
and changed.

►

Select the desired recipe book or

►

Select

►

Choose a recipe.

–

An overview of the steps in the recipe is displayed.

Changing a step

►

Select the step you want to change.

►

Make the settings and confirm with .

Adding a step

►

Select .

►

Make the settings and confirm with .

Deleting a step

►

Select .

–

The overview of the steps in the recipe is displayed.

►

Select the step.

–

The following appears in the display: «Do you want to delete this
step?».

►

To deleted the step, select «Yes».

–

The step is deleted.

Summary of Contents for CSTXSL60

























































































Search results

Summary of Contents for CSTXSL60

Reviews:

V-ZUG CSTXSL60, Operating Instructions Manual, Page: 39 / 88

Search results

Summary of Contents for CSTXSL60

Reviews: