V-ZUG Cooltronic, Operating Instructions Manual

Page: 43 / 120

39
Malfunctions
The appliance is checked for trouble-free
operation before being supplied. Should
you have any problems please contact your
nearest service facility, advising them of
the model number and the details of the
problem.
A malfunction can occur if the electrical
fuse is tripped. This problem can be solved
easily if the fuse mechanism is re-activa-
ted.
Display following power failure
An interruption to the power supply is only
displayed if the freezer temperature is war-
mer than -9°C after restart. In this case the
two temperature displays flash and show
the temperature values that were measu-
red after restart. You can stop the tempe-
rature displays flashing by pressing any
button. The current average temperature
values are then displayed.
Sensor error functions:
– Sensor error F1 on the left-hand side of
temperature display = temperature sen-
sor in the cold room is defective
– Sensor error F2 on the right-hand tempe-
rature display (air temperature of special
compartment) = temperature sensor in
the special compartment is defective
– Sensor error F3 on the right-hand tempe-
rature display (evaporator temperature
of special compartment) = temperature
sensor in the special compartment is
defective
- Error message F4 on the right-hand tem-
perature display (freezer temperature) =
temperature sensor in the freezer defec-
tive.
– Sensor error F7 on the right-hand side of
temperature display = surrounding room
temperature sensor defective.
Emergency mode
If a sensor error is displayed, the entire unit
continues to operate in a time-controlled
emergency mode independently of the
defective sensors.
Guarantee
We warrant the guarantee as of the delivery
date of the appliance.
Any malfunctions which might occur
during this time despite correct operation
and which are caused by material or const-
ruction errors will be corrected under this
guarantee by our customer service.
Not covered by the guarantee:
– LED defects
– Breakage of the glass shelves or polymer
parts
– Defects resulting from not following the
operating instructions or incorrect usage
– Damage claims beyond the guarantee
– Appliance which have been repaired by
third parties.