![background image](http://html1.mh-extra.com/html/v-zug/cooktopinduction-v6000/cooktopinduction-v6000_operating-instructions-manual_3195746018.webp)
6 User settings
If a connection between the hob and the range hood was successfully established, it
must be confirmed on the hob as follows:
▸ Hold the button depressed for 2 seconds.
–
The setting is saved and the user settings are closed.
–
The appliances are connected and OptiLink is active.
5.2
Deactivating OptiLink
Terminating the connection between the range hood and the hob:
▸ Access the user setting (see page 19).
▸ Select the
user setting.
▸ Touch or swipe slider 1 to select the setting.
▸ Hold the button depressed for 2 seconds.
–
The setting is saved and the user settings are closed.
–
OptiLink is deactivated.
See the operating instructions for the range hood for terminating OptiLink.
6
User settings
The following user settings can be set and saved individually:
User setting
Setting value
Factory
setting
Acoustic signal loudness
Low
Medium
High
Acoustic signal at end of
operating time / timer
No acoustic signal
Automatically off after 10 seconds
Automatically off after 1 minute
Operating time
PowerPlus
Ends after 5 minutes
Ends after 10 minutes
Ends after 15 minutes
Automatic boost
Automatic boost off
Automatic boost on
Default operating time /
timer duration
Default duration 0 minutes
Adjustable in steps from
10–90 minutes
Acoustic signal when
buttons are pressed
Acoustic signal off
Acoustic signal on
Cancel wipe protection
To switch wipe protection off: Touch
the
button
Automatically off after 30 seconds
18