V-ZUG CookTop Wok I40, Operating Instructions Manual

Page: 17 / 24

7 Trouble-shooting
7 Trouble-shooting
You may be able to trouble-shoot the following errors yourself. If not, note down the error
message in full (message and E numbers) and then call Customer Services or report it
to us online.
7.1 Error messages
Display Possible cause Solution
flashes alternately
with the power level
▪ Cookware is not suitable
for use with the induction
wok. ▸ Only use the original wok
pan.
illuminates ▪ The childproof lock is ac-
tivated. ▸ See how to operate appli-
ance with childproof lock ac-
tivated.
▸ Switch the childproof lock off
(see page 12).
A continuous acoustic
signal is emitted,
flashes and the appli-
ance switches off ▪ A button or a slider was
touched for longer than
10 seconds.
▪ Object (e.g. pan, dish) on
the control panel.
▪ Food boiled over on to the
control panel.
▸ Remove object or food that
has boiled over.
▸ The appliance can be used
again as normal.
flashes ▪ The excess temperature
protection of a cooking
zone was triggered. ▸ Allow the cooking zone to
cool down.
▸ Check cookware.
flashes ▪ An interruption in the
power supply. ▸ Touch any button to acknow-
ledge the display.
▸ The appliance can be used
again as normal.
or and a num-
ber illuminate
▪ Internal error occurred. ▸ Note down the error number.
▸ Note down the serial number
(SN) of the appliance. See
the identification plate for
this.
▸ Call Customer Services.
17