7 Care and maintenance
▸ To save the change, hold the button depressed for 2 seconds.
–
An acoustic signal is emitted.
–
The appliance is switched off.
▸ To exit user settings without saving any change, touch the button.
1
2
3
4
If no entry is made, the user settings are exited automatically after 1 minute.
6.2
Restoring the factory settings
User settings that have been changed can be restored to the factory setting.
▸ Select the
user setting.
▸ Hold the button depressed for 2 seconds.
–
All user settings have been reset to factory settings.
7
Care and maintenance
Ideally, clean the appliance when it has completely cooled down.
Burns hazard!
Always clean the hob after use. This prevents food residue from burning on. Dried-on or
burned-on food residue is harder to clean off.
Use of improper cleaning techniques can result in damage to the markings or surface.
Avoid cleaning the surface of the glass ceramic hob with abrasive cleaning agents,
scouring pads, wire wool, etc. as they can damage the surface.
▸ Use only a soft cloth or sponge with water and standard washing-up liquid for clean-
ing everyday soiling.
▸ Remove stubborn soiling, e.g. boiled-over milk, while still warm using a glass ceramic
hob scraper. Always follow the scraper manufacturer's instructions for use.
▸ Foods with a high sugar content, e.g. marmalade, that boil over should be removed
while still hot using a glass ceramic hob scraper. The surface of the glass ceramic
hob could otherwise become damaged.
▸ Remove melted plastic while still warm using a glass ceramic hob scraper. The sur-
face of the glass ceramic hob could otherwise become damaged.
▸ Remove limescale stains when cool with a small amount of mild vinegar cleaner or
lemon juice. Then wipe clean with a damp cloth.
▸ Use a suitable Cleaning agent (see page 23) to remove stubborn soiling.
22