![background image](http://html1.mh-extra.com/html/v-zug/cooktop-v4000-i604/cooktop-v4000-i604_operating-instructions-manual_3202774015.webp)
4 Operating the appliance
Switching PowerPlus on
▸ Touch « » on the slider
for the required cooking zone area.
–
illuminates in the digital display.
–
After 10 minutes it automatically switches back to power level .
Removing the cookware interrupts PowerPlus. PowerPlus is resumed as soon as
the cookware is placed back on the cooking zone areas.
If PowerPlus is not possible, flashes for 3 seconds and PowerPlus is switched
off.
Ending PowerPlus before time
▸ Touch the desired power level on the slider
for the required cooking
zone area.
–
PowerPlus ends.
Power management
High power levels cannot be set with both cook-
ware items of a ZoneFlex cooking zone (
A
or
B
)
at the same time. If an attempt is made to oper-
ate two items of cookware at high power levels
within a ZoneFlex cooking zone, then the power
is reduced for the cookware that was first selec-
ted. Reducing the power protects the appliance
connection from overheating.
A
B
4.7
Operating time
Do not leave the hob unattended during use. Risk of food boiling over, burning on
and igniting!
With the operating time function, the cooking zone areas switch off automatically after a
set time (1 – 99 mins.).
Setting the operating time
▸ Touch the slider
for the required cooking zone area and set to power
level or higher.
▸ Touch the
button for the required cooking zone area.
–
The
button flashes.
–
The operating time
flashes in the digital display of the slider.
▸ Touch
on the slider.
–
The operating time
appears in the digital display of the slider.
▸ To set the operating time, swipe the slider
left or right.
–
The new operating time is shown in the digital display.
–
If no further changes are made within 5 seconds, the new operating time is accep-
ted.
–
The operating time is counted down in the digital display.
15