manualshive.com logo in svg

V-ZUG CombiSteamer V6000 Series, Operating Instructions Manual, Page: 48 / 72

Share
Download
V-ZUG CombiSteamer V6000 Series Operating Instructions Manual Download Page 48

7 User settings

Date and time format

The time can be displayed in the European 24-hour time format or the 12-hour time
format (a.m./p.m.). 
The date can be displayed in the formats DD.MM.YYYY, YYYY-MM-DD or MM/DD/YYYY.

Time in standby

It is possible to choose between the settings «Off», «On» and «On with night mode».

Night mode

The night mode reduces the brightness of the time display. The start time for the night
mode is settable.

The night mode always runs 8 hours.

Time synchronization

It is possible to choose between mains synchronization and real-time clock (RTC).

7.9 

V-ZUG Home

Mode

It is possible to choose between «Off», «Display» and «Operate and display». To connect
the appliance to «V-ZUG-Home», «Operate and display» must be selected.

Displaying information

Displays all relevant information for the connection.

Restarting interface

The interface can be reset if difficulties are experienced establishing a connection.

Resetting

Disconnects all connections to mobile devices.

Further information about V-ZUG-Home and availability can be found at

home.vzug.com

 or in the 

Operating instructions for V-ZUG-Home

.

7.10 

Appliance information

Identification numbers

The serial number (SN) and article number are displayed.

Version numbers

The current software versions are displayed.

Descaling

The date of the last descaling process, the number of descaling processes already per-
formed and the remaining operating time until the next necessary descaling process are
provided (see page 55).

Demo mode

The appliance shows the current demo mode status. The demo mode can only be
switched on and off in the service menu.

Contacting Customer Services

The contact information for our Customer Services is displayed.

48

Summary of Contents for CombiSteamer V6000 Series









































































Reviews:

No comments