8 Care and maintenance
Applies to all appliances:
▸ Put the door glass
3
back in. To do this, insert
the door glass
3
into the door frame and gently
push it back towards the hinges.
–
The markings on the glass must be legible.
▸ Fit the seal
2
.
2
3
▸ Insert the door glass
1
into the door frame and
gently push it back towards the hinges.
–
The door glass
1
can only be put back if po-
sitioned correctly with the shiny surface on
the outside.
1
8.6
Cleaning the door seal
▸ Clean the door seal with a soft cloth dampened with water, but do not use any clean-
ing agent.
▸ Dry with a soft cloth.
The door seal in appliances with a pyrolysis function is impregnated with graphite,
which can transfer off onto the cloth when being cleaned.
8.7
Replacing the door seal
We generally recommend the door seal be replaced by our service staff. However, you
can also replace the door seal of your appliance yourself.
We accept no liability for any damage caused by the door seal not having been fitted
properly.
Removing the door seal
▸ In each of the four corners, turn the seal out-
wards by about 30° and carefully pull the clip
out of the slot.
▸ When all four clips have been released, re-
move the seal.
▸ Clean the groove in the appliance with a damp
cloth.
1.
2.
3.
4.
X
54
Summary of Contents for Combair V6000 45
Page 66: ...66 15 Notes...