12 Trouble-shooting
–
The rinsing phase starts automatically.
–
The following appears in the display: «Rinsing appliance.».
▸ Repeat the process as often as is necessary.
As the water is heated up during final rinsing, the appliance door may steam up.
Ending the descaling process
▸ As soon as the corresponding message appears in the display, remove, empty and
dry the water tank.
▸ Wipe up any water in the bottom of the cooking space with a soft cloth.
▸ To confirm the message, select .
–
The following appears in the display: «Appliance has been successfully descaled».
▸ To confirm the message, select .
–
The appliance is ready for operation again.
For the
,
,
or
operating modes, after descaling, the water that is
pumped back into the water tank may not be clear. This will not affect the cooking
or baking characteristics nor the quality of the food being cooked or baked.
12
Trouble-shooting
12.1
What to do if …
This section lists faults that can be solved simply by following the instructions given. If
another fault is displayed or the fault cannot be remedied, please call Customer Ser-
vices.
Before calling Customer Services, please note down the error message in full.
Fxx/Exxx see operating instructions
SNxxxxx xxxxxx.
… the appliance is not working
Possible cause
Solution
▪
A household fuse or circuit
breaker has tripped.
▸ Change the fuse.
▸ Reset the circuit breaker.
▪
The fuse or circuit breaker
keeps blowing.
▸ Call Customer Services.
▪
An interruption in the mains
power supply.
▸ Check the power supply.
▪
Demo mode is switched on.
It is only possible to switch off demo mode with a
safety code.
▸ Call Customer Services.
▪
The appliance is faulty.
▸ Call Customer Services.
… just the illumination is not working
Possible cause
Solution
▪
The halogen light is defective. ▸ Call Customer Services.
41
