5 Using the appliance
5.10
Switching the appliance off
▸ Press the touch button.
–
An acoustic signal is emitted.
–
Any running operating mode or application is ended; if switched on, the timer,
cooking space illumination, heatable appliance drawer or plate warmer will remain
active.
–
«
Residual heat» appears in the display.
–
The following message appears in the display after all operating modes with steam:
«Draining appliance. Please do not remove the water tank.»
▸ Press the touch button again.
–
All touch buttons go out.
–
All functions are ended and switched off.
Or at the end of operation:
▸ Select the option in the display.
–
An acoustic signal is emitted.
–
Any running operating mode or application is ended; if switched on, the timer,
cooking space illumination, heatable appliance drawer or plate warmer will remain
active.
–
The following appears in the display: «
Residual heat».
▸ Press the touch button.
–
All touch buttons go out.
–
All functions are ended and switched off.
The appliance is switched off if none of the touch buttons are illuminated any more
and the display is dark.
The cooling fan can continue to run.
5.11
Emptying the water tank
Risk of scalding!
The water in the tank may be hot. If «Please do not remove the water tank» ap-
pears in the display, the temperature of the residual water is too high. Do not re-
move the water tank!
For safety reasons, the residual water is not pumped off until the temperature has
fallen below a certain level.
When the appliance is switched off, the residual water is pumped back into the water
tank.
The following appears in the display: «Water is being pumped off». When the water has
been pumped back:
▸ Press the
touch button.
–
The water tank is ejected, if activated.
▸ Remove, empty and dry the water tank.
▸ Put the water tank back.
Any operating mode can be started again.
23
