3 Operation
▸ Release the
1
button
Please charge card
▸ Hold the charge card to the card reader.
The charge authorization code on the card is not checked.
▸ Remove the charge card.
–
Tariff appliance 1
x.xx
appears in the display.
▸ To change the tariff, touch the
1
or
2
button.
–
The text in the display changes after about 5 seconds.
–
The setting is saved.
–
Tariff appliance 2
x.xx
appears in the display.
The other settings (amount charged and language) can be changed in exactly the same
way.
–
xxxx xxxxx
appears in the display.
–
End
appears in the display.
The appliance continues after 3 seconds. The next setting can be made.
–
Please select appliance
appears in the display.
3.12
Using the totaliser card
The procedure described below is explained on the basis of model 82A.
▸ Briefly press the
1
button.
–
...
Please select appliance
appears in the display and the LEDs flash.
–
Hold the totaliser card to the card reader.
–
Total charged
xxxx.xx
appears in the display.
▸ Hold the totaliser card to the card reader while the card is checked.
–
After 3 seconds,
Press button 1 to delete total
appears in the display.
▸ To delete, press the
1
button.
–
Total charged
0.00
appears in the display.
If the total charged is not to be deleted, remove the totaliser card from the card
reader without pressing the
1
button.
–
Remove card
appears in the display.
▸ Remove the totaliser card from the card reader.
▸ After 3 seconds,
End
appears in the display.
The appliance continues after 3 seconds.
–
Please select appliance
appears in the display.
–
The above procedure can be carried out again.
13