3 Operation
The appliance continues after 3 seconds. If the card has not yet been removed from the
card reader:
–
Remove card
appears in the display and the LED is illuminated.
▸ Remove the card from the card reader.
Returning credit to the user card for appliance 2, double machine
To debit the user card for appliance 2 hold down the
2
button instead of the
1
button. Then proceed as with appliance 1.
3.10
Using the charge card
Charging the user card
▸ Briefly press the
1
button.
–
...
Please select appliance
appears in the display and the LEDs are illuminated.
▸ Briefly press the
1
button again.
–
Please insert card
appears in the display.
▸ Hold the charge card to the card reader.
The charge authorisation code on the card is checked.
–
If the charge code on the charge card is 0, then
Save charge code
ap-
pears in the display.
The appliance continues after 3 seconds.
–
Press button 1 to save data
appears in the display.
▸ Press the
1
button to confirm.
–
Charge
appears in the display.
–
then
Please insert card to charge
▸ Hold the user card to the card reader.
–
New credit amount xxx.xx
appears in the display.
–
A buzzer sounds briefly to confirm.
The appliance continues after 3 seconds. If the card has not yet been removed from the
card reader:
–
Remove card
appears in the display.
If the credit on the user card is the same as or greater than the amount charged,
Card already charged
appears in the display.
If no other user cards are charged, the display goes out after about 10 seconds.
–
End
appears in the display.
3.11
Settings with the charge card
The procedure described below is explained on the basis of model 82A.
▸ Hold down the
1
button.
▸
Please select appliance
appears in the display and the LEDs flash.
▸ After 3 seconds,
Return credit
appears in the display.
▸ After 10 seconds,
Setting
appears in the display.
12
