manualshive.com logo in svg

V-ZUG BCSLPZ60, Operating Instructions Manual

Share
Download
V-ZUG BCSLPZ60 Operating Instructions Manual Download Page 45

12 Trouble-shooting

… the appliance is not working

Possible cause

Solution

▪

A household fuse or circuit
breaker has tripped.

▸ Change the fuse.
▸ Reset the circuit breaker.

▪

The fuse or circuit breaker
keeps blowing.

▸ Call Customer Services.

▪

An interruption in the mains
power supply.

▸ Check the power supply.

▪

Demo mode is switched on.

It is only possible to switch off demo mode with a
safety code.

▸ Call Customer Services.

▪

The appliance is faulty.

▸ Call Customer Services.

… the appliance door cannot be opened

Possible cause

Solution

▪

The temperature of the cook-
ing space is over 300 °C.

▸ Wait for it to cool down.
The appliance door cannot be opened until the tem-
perature of the cooking space has dropped below
300 °C.

▪

Pyrolytic self-cleaning is run-
ning.

▸ Wait until pyrolytic self-cleaning has finished.

… just the illumination is not working

Possible cause

Solution

▪

The halogen light is defective.  ▸ Switch off the oven.

▸ Disconnect the appliance from the electricity sup-

ply.

▸ Replace the halogen light bulb.

... the cooking time seems unusually long

Possible cause

Solution

▪

The appliance only has a
single-phase connection.

▸ Establish a two-phase connection. 

… when grilling, thick smoke is given off

Possible cause

Solution

▪

The food is too near to the
heating elements.

▸ Check that the level selected corresponds to the

«EasyCook».

▪

Grill setting is too high.

▸ Reduce the grill setting.

45

Summary of Contents for BCSLPZ60

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands