V-ZUG AiroClearCabinet V400, Operating Instructions Manual

Page: 7 / 24

2 Appliance description
2.1 Introduction
The appliance is designed for use in the home for extracting cooking odours from above
a cooking area and can be used in the extraction or recirculation mode.
2.2 Extraction mode
A fan extracts cooking fumes and smells from above the cooking surface. The metal
grease filters clean the extracted air, which is then passed through a connecting pipe fit-
ted with an integrated non-return valve and through the air duct to the outside.
When in use, ensure there is a sufficient supply of fresh air to replace the air that is
being extracted.
2.3 Recirculation mode
After being filtered through the metal grease filters, the cooking fumes and smells above
the cooking area are passed through an activated charcoal filter. The filtered air is then
circulated back into the room through the side openings.
If activated charcoal filters are not supplied with the appliance, these should be
ordered and installed before using the appliance for the first time.
2.4 Features
▪ Flat pull-out deflector plate
▪ 2 metal grease filters
▪ Illumination
▪ 1 activated charcoal filter (only for recirculation mode, not included in the scope of de-
livery)
▪ 1 extractor fan with 4 power levels
– Level 1 = low, 2 = medium, 3 = high extraction rate
– Power level 4 (intensive) is used for short bursts of intensive extraction of cooking
smells and fumes, e.g. when searing meat. Afterwards, switch back to power level
1, 2 or 3.
7