V-ZUG AiroClearCabinet V400, Operating Instructions Manual

Page: 12 / 24

4 Care and maintenance
4.2 Metal grease filters
The metal grease filters must be cleaned at least once a month with normal use. If prop-
erly cared for, the grease filters should provide years of service.
Removing
Using both hands, carefully remove the metal grease filters, making sure not to
drop or damage them.
▸ Pull the deflector plate 1 completely
out.
▸ Push the grip 2 on the grease filter in.
– This releases the grease filter 3 .
▸ Carefully pull the grease filter 3 down
and out of the fixture.
▸ Clean the grease filter 3 .
2
3
1
Cleaning
▸ Clean the grease filters 3 in the dishwasher.
▸ Select an «intensive» or «heavy» wash programme with a warm prewash.
Cleaning may cause the metal grease filters to become slightly discoloured. How-
ever, this will not affect the functioning of the filters in any way.
If no dishwasher is available:
▸ Clean the grease filters
3 in the sink with hot water and detergent.
▸ Then soak the grease filters 3 in hot water in the sink for about 2 hours and finally
clean with a washing-up brush. Rinse well with clean cold water.
Installing
▸ Reassemble in the reverse order.
3
1
2
Ensure all centring pins 1 are positioned properly in the receiving slots 2 .
12