V-ZUG AiroClearCabinet V400, Operating Instructions Manual

Page: 10 / 24

3 Operating the appliance
3.4 Intensive level
▸ Touch the button repeatedly until (intensive level 3) flashes in the display.
▸ The appliance switches back to level 2 after 5 minutes.
▸ Touch the
button to stop the intensive level before the 5 minutes has elapsed.
3.5 After-running time
▸ Switch the appliance on.
▸ Select the desired power level.
▸ Touching the
button activates the after-running time.
– While the after-running time is activated, the display flashes according to the
table below and then switches off automatically.
Level After-running time
1 20 minutes
2 15 minutes
3 10 minutes
Intensive 5 minutes
3.6 Illumination
▸ Press the button to switch the illumination on.
▸ Press the button repeatedly to switch the illumination off.
The illumination does not switch off automatically when the deflector plate is
pushed in.
3.7 Switching the appliance off
▸ Push the deflector plate completely
in.
– The extractor fan is switched off.
– The settings are saved.
If the deflector plate is pulled slightly out again, the extractor fan comes on at the
level previously set.
10