3 Operating the appliance
2.6
Operating and display elements
Switch illumination on/off; set colour temperature
Switch appliance on/off
Power level 1
Power level 2
Power level 3 and intensive level (flashing)
Activate after-running time
Saturation indicator for metal grease filter (flashing)
Saturation indicator for activated charcoal filter (flashing)
Depending on the model and features, the specification of your appliance may dif-
fer in individual details from the standard specification described.
3
Operating the appliance
3.1
Using for the first time
Appliance configuration
The model can be used to extract or recirculate air. The appliance is set up by default for
use in the
recirculation mode
. The cleaning interval for the activated charcoal filter is 180
operating hours. This default setting can be adjusted to suit your cooking habits.
Setting up the appliance for use in the recirculation mode
To activate the saturation indicator for activated charcoal filters if the appliance was pre-
viously set up for the extraction mode:
▸ Switch the appliance and the illumination off.
▸ Hold the
button depressed for 5 seconds.
–
The LEDs for the and
buttons flash.
–
If no further selection is made, the value is accepted after 5 seconds and the LEDs
stop flashing after 10 seconds.
▸ To change the cleaning interval: Select the corresponding button , or
.
–
The LEDs for the
button and, depending on the cleaning interval set, , or
flash.
–
The setting is accepted after 5 seconds and the LEDs stop flashing after 10
seconds.
–
The appliance is now configured for the recirculation mode and the saturation indic-
ator for the activated charcoal filter is
activated
.
9
