9 User settings
Emptying the storage tank
Selection
Touch the button to immediately empty the
storage tank.
▪
: Empty storage tank
Emptying the tank in the event of a power
failure
Selection
If the user setting is activated, the storage tank
is emptied after a power failure even if the Eco
programme was running beforehand.
▪
: Activated
▪
: Deactivated (factory setting)
Heat pump *
Selection
If the user setting is activated, the heat pump
may be switched on depending on the wash
temperature. Energy consumption is reduced
and the programme time extended. The pro-
gramme time also varies according to the set-
tings (user settings, additional functions). If
several programmes are started one after the
other, the heat pump may remain switched off.
▪
: Activated (factory setting)
▪
: Deactivated
* Depending on model
Hot water connection
Selection
If the appliance has a hot water connection
and the setting is activated, optimum use is
made of the hot water available.
For the «No heating» setting: only enable if
the inlet water is 60° C. The dishes may not
be completely dry by the end of the pro-
gramme. Leave the dishes in the appliance
(e.g. overnight) to dry.
▪
: Activated
▪
: No heating
▪
: Deactivated (factory setting)
Deleting favourites
Selection
Touch «Delete» and confirm the prompt to
delete all the favourites.
▪
: Deleting
Factory setting
Selection
With «YES», all user settings are reset to the
factory settings.
▪
YES
▪
NO
Service settings
The service settings are only available for use
by service staff.
44
Summary of Contents for AdoraDish V6000
Page 4: ...4 15 Service Support 59 ...
