V-ZUG AdoraDish V6000 Operating Instructions Manual Download

Page: 33 / 60

6 Operation

6.7

Adding extra dishes

The dishes and water may be hot. Scalding hazard!

▸ Open the appliance door carefully.

–

This interrupts the programme.

–

The interrupted programme alternates in the display with the «Close the door» mes-
sage.

Intensive

0h35

1h15

70°

▸ Load the dishes (see page 20).
▸ Close the appliance door.

–

The programme is resumed.

6.8

Aborting a programme before time

The dishes and water may be hot. Scalding hazard!

▸ Open the appliance door carefully.

–

This interrupts the programme.

–

The interrupted programme alternates in the display with the «Close the door» mes-
sage.

Intensive

0h35

1h15

70°

▸ Touch the button.

–

The following message appears in the display:

Do you want to abort the programme?

YES

▸ Touch «YES».

–

In the display appears: «The programme is aborted…»

–

The water is pumped off.

–

A 5× acoustic signal is emitted.

–

The display goes out.

–

The programme is aborted.

Summary of Contents for AdoraDish V6000





























































Search results

Summary of Contents for AdoraDish V6000

Reviews:

Related manuals for AdoraDish V6000

Brands by name

Popular brands

V-ZUG AdoraDish V6000, Operating Instructions Manual

Search results

Summary of Contents for AdoraDish V6000

Reviews:

Related manuals for AdoraDish V6000

Brands by name

Popular brands