V-ZUG AdoraDish V6000 OptiLift, Operating Instructions Manual, Page: 26 / 64

6 Operation
Inserting the cutlery drawer
▸ Extend the rails 1 as far as they will go.
▸ Position the back corners 2 of the cutlery
drawer frame in the fixture 3 and press
down gently until they click into place.
1
1
2
3
6 Operation
6.1 Dish washing tips
General note
▪ Do not overload the baskets.
▪ Dishes, pots and pans with heavily burned-on food debris stuck to them should be
soaked in water first.
▪ Load beverage and food containers such as cups, glasses, pots, etc. with the opening
facing downwards so that the water can drain off.
▪ When loading, ensure glasses do not touch so as to prevent damage and water
spots.
▪ When cleaning range hood grease filters, select the «Intensive» programme and
use the maximum amount of detergent.
Energy and water economy
▪ Load to the maximum capacity of the appliance.
▪ Do not pre-rinse the dishes manually. This leads to increased water and energy con-
sumption.
▪ If the dishes are cleaned in the dishwasher following the operating instructions, then,
as a rule, less water and energy are consumed than with manual washing.
Dishes
Not all table- and kitchenware are dishwasher safe.
▪ Clean wooden or plastic parts that are sensitive to damage from heat and detergent
suds by hand.
▪ Pottery has a tendency to crack or chip.
▪ The printing on glass and porcelain is hard-wearing only to a point and eventually over
time can wear off.
▪ Glassware, depending on the type and the detergent being used, can become cloudy.
Check with your glassware supplier as to whether your glassware is dishwasher safe.
▪ Stress and tension in thick cut crystal glasses and dishes can cause cracking.
▪ Do not wash dishes with adhesive labels on them. Adhesive labels can come off and
clog up the filter system.
▪ Objects made of silver, copper and tin tend to discolour, turning brown or black.
▪ Spots tend to form on aluminium. Wash aluminium separately or by hand.
26