V-ZUG AdoraDish V6000 OptiLift, Operating Instructions Manual, Page: 17 / 64

4 Functions
4.2 Setting options
Energy saving
The wash temperature is reduced by 5 °C, lowering energy consumption by approx. 10
%. The programme time is shortened slightly. «Energy saving» is also gentle on glasses.
SteamFinish
During final rinsing, steam is generated, which settles on the glasses and leads to op-
timum drying results. The programme takes about 15 minutes longer.
Partial load
For a small load of dishes. The amount of water used is reduced by up to 6 l and the
programme time is shortened by up to 36 minutes.
Delayed start
The delayed start allows you to wash during off-peak hours (e.g. at off-peak electricity
rates). A delayed start of between 30 minutes and 24 hours can be set.
OptiStart
OptiStart can be selected together with a delayed start (see page 41). During the
delayed start period, the dishes are soaked and this improves the cleaning results and
reduces the energy consumption.
RinsePlus
The cleaning effect is improved through additional rinsing cycles and an extended clean-
ing phase. If RinsePlus is turned on, the amount of water used with each programme is
increased. This extends the programme time.
DryPlus
The temperature of both the final rinse and the SteamFinish are increased and the dry-
ing time is extended.
4.3 Frequently used user settings
Childproof lock
The «Childproof lock» user setting prevents a programme from being started accident-
ally. If the childproof lock is turned on, it can be overridden by entering the four-digit
code (1223). The code is set at the factory and cannot be changed.
All in 1
The «All in 1» user setting adapts the programme ideally for use with detergent with in-
tegrated salt and rinse agent function. Combination cleaning agents are not suitable for
all degrees of water hardness (see page 27).
Wipe protection
The operating panel is locked briefly, e.g. for cleaning purposes.
17