V-ZUG AdoraDish V4000 OptiLift, Operating Instructions Manual, Page: 51 / 72

10 Demo mode
Deleting favourites Selection
Touch «Delete» and confirm the prompt to
delete all the favourites. ▪ : Deleting
Factory setting Selection
With «YES», all user settings are reset to the
factory settings. ▪ YES
▪ NO
Service settings
The service settings are only available for use
by service staff.
10 Demo mode
10.1 General information
The demo mode is a simulation programme where all programmes are carried out
without water or heating.
The appliance can be fully operated in the demo mode, but it will not wash.
Service settings may only be made by qualified personnel.
The demo mode can only be switched on or off when the appliance door is open.
When the demo mode is on, the following messages appear:
▸ When the appliance wakes up
START
Demo mode active
Deactivate in the service settings
▸ In the user guidance

51