V-ZUG AdoraDish V4000 OptiLift, Operating Instructions Manual, Page: 50 / 72

9 User settings
Automatic door opener Selection
If the user setting is activated, the appliance
door opens slightly automatically during the
drying and final drying phase to save energy. If
the user setting is deactivated, the programme
time is extended by 10 minutes. ▪ : Activated (factory setting)
▪ : Deactivated
Operation and door angle Selection
If the user setting is activated, the display is
locked and cannot be operated when the door
opening angle is greater than 46° so as to
prevent any of the settings being inadvertently
changed. ▪ : Activated (factory setting)
▪ : Deactivated
Automatic stand-by Selection
If the user setting is activated, the information
in the display goes out at the end of the pro-
gramme. If the user setting is deactivated, the
information can be displayed by operating the
appliance door. Press any button and the dis-
play then goes out. ▪ : Activated (factory setting)
▪ : Deactivated
V-ZUG-Home Selection
With V-ZUG-Home, you can access your appli-
ances over the V-ZUG App to, for instance, re-
trieve and change the user settings or retrieve
various statistics about your household appli-
ances. ▪ : Activated
▪ : Deactivated (factory setting)
Further information on V-ZUG-Home and its availability can be found at
home.vzug.com.
EcoManagement Selection
If the user setting is activated, EcoManage-
ment provides information on the energy and
water consumption of the appliance. With «De-
lete» , all consumption values are reset to
«0». ▪ : Activated (factory setting)
▪ : Delete
▪ : Deactivated
Hot water connection Selection
If the appliance has a hot water connection
and the setting is activated, optimum use is
made of the hot water available.
For the «No heating» setting: only enable if
the inlet water is 60° C. The dishes may not
be completely dry by the end of the pro-
gramme. Leave the dishes in the appliance
(e.g. overnight) to dry.
▪ : Activated
▪ : No heating
▪ : Deactivated (factory setting)
50