6 Operation
6.2
Selecting detergent
General note
Do not use washing-up liquid! Strong foaming can cause the appliance to malfunc-
tion. Follow the dosage instructions printed on the detergent packaging exactly.
Should you have any questions, please contact the detergent manufacturer. Using
too high or too low a dosage can cause damage to the appliance.
▸ Only use detergent suitable for dishwashers (tabs, powder, gel, combination cleaning
products).
Tabs
Tabs are suitable for programmes with wash temperatures of over 55 °C. Tabs may not
dissolve properly at a wash temperature of below 55°C, affecting the cleaning perform-
ance of the appliance.
Combination cleaning products (tabs/powder)
If using combination cleaning products, which should render the use of rinse agent and
regeneration salt superfluous, please observe the following tips:
▸ Check that the water hardness range indicated by the detergent manufacturer on the
product packaging matches the hardness of your local water supply.
▸ Activate the «All in 1»
frequent user setting (see page 33).
–
The programmes and displays are adapted to suit the combination cleaning
product.
▸ If the
refill indicator flashes, refill the salt reservoir with regeneration salt (see page
39).
▸ If the refill indicator flashes, refill the rinse agent reservoir with rinse agent (see
If, after washing and drying, the results are not satisfactory:
▸ use conventional cleaning products.
▸ Deactivate the «All in 1»
frequent user setting (see page 33).
For complaints, contact the detergent manufacturer.
22
