V-ZUG Adora SLX, Operating Instructions Manual

Page: 66 / 76

… Technical data
66
Note for testing institutes
Set to the standard programme according to EN 60456:
A
Select the 60 °C Coloureds wash programme using the « Coloureds» button.
A
Press the «Soiling» button.
A
Press the «+» button repeatedly until «heavy» is displayed.
A
Press the «Spinning» button.
A
Press the «+» button repeatedly until «1800 rpm» is displayed.
Set to the 40 °C Easy care standard programme:
A
Select the 60 °C Coloureds wash programme using the « Coloureds» button.
A
Press the «Temperature» button.
A
Press the «–» button repeatedly until «40 °C» is displayed.
A
Press the «Soiling» button.
A
Press the «+» button repeatedly until «heavy» is displayed.
A
Press the «Easy care» button and then select «on».
Unbalanced load detection system
When spinning, if the control system recognises that the load is out of balance, it will
interrupt the spinning action once or more. This helps distribute the load more evenly
inside the washing drum. If this is not successful, the spin speed is reduced. The wash-
ing is spun less intensively and is therefore wetter to the touch.
60
60