3
Using for the first time
The appliance must be installed and connected to the electricity supply in
accordance with the separate installation instructions. Have a qualified fitter/
electrician carry out the necessary work.
The appliance was tested with water before being shipped. There may
therefore still be traces of water left in the appliance.
Transport lock
Before using the appliance for the first time, the transportation lock
must be removed (3 screws with washers at the back of the appli-
ance), in order to avoid damage to the appliance.
Setting the language, time and date
Set the language, time and date in the user
settings.
Hold the
button depressed until the
following appears in the plain text display:
User settings
FN XXXXX XXXXXX
Press the
button repeatedly until «Language» or «Time and date»
«set?» appear in the plain text display.
Use the
60
button to make the desired settings.
To ensure the user settings are saved, the power supply to the appli-
ance should not be switched off for at least 30 minutes.
Running the first wash cycle without any washing
Run an empty wash cycle to remove any residues from the manufacturing
process.
Add a little washing detergent to compartment
II
.
Select coloureds 60 °C.
14
