V-ZUG Adora 55 S Operating Instructions Manual Download

Page: 44 / 76

5 Operation

5.8

Selecting additional functions

After selecting a programme, it is possible – within 15 seconds and while the
programme symbol is flashing – to select additional functions.

➤

Press the additional function button.

–

illuminates (example).

– The programme starts in 15 seconds.

Energy saving

This additional function reduces the energy consumption by approximately
10 %.

➤

Press the

button while the programme symbol is flashing.

–

illuminates.

➤

Press the

button repeatedly to cancel the additional function.

Partial load

This additional function adjusts the amount of water to the smaller load.

➤

Press the

button while the programme symbol is flashing.

–

illuminates.

➤

Press the

button repeatedly to clear the additional function.

It is not possible to select the additional

function with the

and

programmes.

Summary of Contents for Adora 55 S













































































Search results

Summary of Contents for Adora 55 S

Reviews:

Related manuals for Adora 55 S

Brands by name

Popular brands

V-ZUG Adora 55 S, Operating Instructions Manual

Search results

Summary of Contents for Adora 55 S

Reviews:

Related manuals for Adora 55 S

Brands by name

Popular brands