4 User settings
27
4.6
Hot water connection
The available hot water is used optimally. If the water intake is still too cold,
a short pre-rinse is carried out. The cleaning phase with hot water follows. If
the additional energy saving function is selected, the water is heated up
further electrically to only a minimum temperature, reducing energy
consumption further.
Setting the hot water
➤
Hold the
button depressed for 5 seconds.
– Display:
➤
Press the
button repeatedly until the current setting appears in the
display.
– Display:
(example:
Hot water connection «Off», factory setting)
➤
To change, press the
button.
– Display:
(example:
Hot water connection «On»)
– The setting is accepted.
➤
To exit user settings, press the
button repeatedly until the display goes
out.
